LSIS

Features

HMI

• 8.4″inches of large color Touch screen
  • Convenient operation by 8.4″large color Touch screen
  • Intuitive display of various diagrams, pictures, charts
  • Available to control and operate on screen by graphic user interface

• Language selection and User selective menu
  • Language selecting on X-GIPAM screen menu(Korean/English)
  • Customizing frequent monitoring 3 menu

• H/W, S/W flexibility
  • Reliability Improvement by Independent module structure
  • Expandable DI/DO boards (DI:40, DO:40 points) / AI/AO boards (AI:12, AO:8 channels)
  • Easy configuration and installation of switchgear by detachable HMI option

• IEC 61850 communication
  • Providing high-speed and two-way communication based on Ethernet
  • Realization of wireless interlock by supplying GOOSE function
  • Supporting all defined in IEC 61859 Standards (Report, Dataset, Control)
  • Available to establish connection of communication system with different IEDs

Hardware & software Flexibility

• X-GIPAM manager with advanced function
  • Available to set various menu through PC manager (relay elements, CB, CT/PT ratio, etc.)
  • Setting and editing Digital or analogue I/O points
• Mimic Diagram function
  • Convenient monitoring by graphic mimic diagram of power system on HMI
• Dual Communication System
  • Supporting Independent dual communication system due to built-in dual ports
  • Possible to communicate with multi-SCADA system without port switching
• Various measurements and monitoring functions
  • 0.2% of Voltage and Current Measuring accuracy
  • Recording peak/demand value of current and power
  • Available to wave-capture for input voltage and current

Intelligent Device

• Input/Output points monitoring and control function
  • Monitoring AI/AO variation rate through VOC(Value of Change) function
  • Multi SW control(6 switching devices) through Power output.
• Advanced PQ(Power Quality) measurement
  • Analysis/Measurement of Sag, Swell, Interruption
  • Offering analyze of harmonics(up to 63rd levels)(1~63 Harmonics and THD, TDD, K-factor)
  • 0.2% of measurement accuracy for Current and Voltage and 0.5% for Power, Energy, etc.
• Group setting function
  • Available to configure up to 4 setting groups for each relay element
  • Automatically recognizing any change of the status in power system.
• Supervision of CB Capacity Limit
  • Calculation of thermal energy through accumulating value of breaking current and operating times
  • Realizing prevention of break failure through advanced monitoring system

Rating