LSIS

Print

Download Center

How to Use Download Center

download of detail page
Title [HMI] XP-Builder V2.03 B[005] Date
File

▷ New functions
1. Up to 16 eXP controllers can be registered.
2. Addition of eXP30 model.
3. Execute wXP with *.xpdz file.
4. Multiple logging index data can be displayed at logging backup.
5. Logging When backup, date and time can be displayed in different cells.
6. Only the character format of the switch and the lamp can be copied.
7. Added image copy function of switch and lamp.
8. Input/Output conversion of Number/Character can be modified in property window.
9. Added line thickness setting function of Trend/Logging trend graph.
10. Add a header to the CSV file.
11. Added wallpaper changing function.
12. Added function to cancel object and shape selection with ESC key.
13. Added function to delete the logging backup column.
14. Adding script function.
15. Addition of ON/OFF function of human body sensor.
16. Script stack capacity expansion.
17. Added logging backup setting function.
18. Shape - Adds interleaved and interleaved functions in strings.
19. Adding script function.
20. Add VNC Viewer object.
21. Pop-up small keypad when Panel width is below 480.

▷ Improvement/Corrections
1. When saving as a compressed file type file, it will be prompted to overwrite the user even if the same file exists.
2. Fixed the problem that the insertion order is not filled from the empty position when importing the string table screen.
3. Fixed an issue where an error window would not be displayed if an invalid address was entered in the device input window.
4. Fixed a problem where negative numbers were not input when the reference line was a real number.
5. Fixed the problem that XG5000 Tag Import does not work for XMC model.
6. Fixed the problem that when selecting image of different category for each state in N-phase lamp and then Rotating/Flipping the device down.
7. Fixed a problem where the device also appeared when the tag was selected in Tools -> Individual Find/Replace.
8. Fixed a problem where the device value set in the tag in the specific object and the device value displayed in the individual Find/Replace window appear differently.
9. Fixed the error message that "unsupported function" occurred when using switch and lamp indication blinking in economy type.
10. Fixed animation size limitation when adding animation library.
11. Automatically uploads the project when the engine is updated.
12. Fixed to save backup file type and backup path when saving project as file.
13. Fixed a problem where the position of the object does not match under certain conditions.
14. Fixed max number of eXP controllers to 16.
15. Fixed an error message when entering wrong address in device input window.
16. Fixed the problem that the order does not match when Group/Ungroup.
17. Modify movement speed when moving object using direction key of keyboard.
18. Fixed a problem where the builder terminated when changing the font in the individual Find/Replace menu.
19. Fixed a problem that forced project termination when using device map under certain conditions.
20. In Trend/Logging trend graph, the value is displayed when reference line value is 32 bit device.
21. When Copy/Paste the logging trend graph, paste problem is corrected.
22. Fixed a problem that when downloading a project to a storage device, the file is not released normally when saved as *.xpdz file.
23. Fixed so that the blinking timing becomes the same at the time of placement after setting image and string flash function of several Lamps/Switches.
24. Fixed the problem that when logging back up, strange lines are generated when using condition added at the end of CSV file.
25. PLC information display error when connecting with new PLC type.
26. XP-Remote communication failure error when using router.
27. Fixed Hangul Keypad Speed ??Problem.
28. Correction of language switching device output abnormality.
29. Correcting trend graph acquisition cycle abnormality.
30. Abnormal frame area behavior of view object.
31. Fixed security user ID mode error.
32. Correction of error related to N-phase lamp.
33. Corrected header fragmentation in logging view object.
34. Corrected the problem of filling operation with numeric input device 0.
35. Fixed the problem of downloading *.xpdz file.
36. Fixing user ID notation error.


PREV  >> [HMI] XP-Builder V2.10(B22) Software
NEXT  >> [HMI] Patch file for IAI Corporation: IAI ROBO Cylinder Controller Serial Driver V1.03
download of detail page
Title [HMI] XP-Builder V2.03 B[005]
Date
File

▷ New functions
1. Up to 16 eXP controllers can be registered.
2. Addition of eXP30 model.
3. Execute wXP with *.xpdz file.
4. Multiple logging index data can be displayed at logging backup.
5. Logging When backup, date and time can be displayed in different cells.
6. Only the character format of the switch and the lamp can be copied.
7. Added image copy function of switch and lamp.
8. Input/Output conversion of Number/Character can be modified in property window.
9. Added line thickness setting function of Trend/Logging trend graph.
10. Add a header to the CSV file.
11. Added wallpaper changing function.
12. Added function to cancel object and shape selection with ESC key.
13. Added function to delete the logging backup column.
14. Adding script function.
15. Addition of ON/OFF function of human body sensor.
16. Script stack capacity expansion.
17. Added logging backup setting function.
18. Shape - Adds interleaved and interleaved functions in strings.
19. Adding script function.
20. Add VNC Viewer object.
21. Pop-up small keypad when Panel width is below 480.

▷ Improvement/Corrections
1. When saving as a compressed file type file, it will be prompted to overwrite the user even if the same file exists.
2. Fixed the problem that the insertion order is not filled from the empty position when importing the string table screen.
3. Fixed an issue where an error window would not be displayed if an invalid address was entered in the device input window.
4. Fixed a problem where negative numbers were not input when the reference line was a real number.
5. Fixed the problem that XG5000 Tag Import does not work for XMC model.
6. Fixed the problem that when selecting image of different category for each state in N-phase lamp and then Rotating/Flipping the device down.
7. Fixed a problem where the device also appeared when the tag was selected in Tools -> Individual Find/Replace.
8. Fixed a problem where the device value set in the tag in the specific object and the device value displayed in the individual Find/Replace window appear differently.
9. Fixed the error message that "unsupported function" occurred when using switch and lamp indication blinking in economy type.
10. Fixed animation size limitation when adding animation library.
11. Automatically uploads the project when the engine is updated.
12. Fixed to save backup file type and backup path when saving project as file.
13. Fixed a problem where the position of the object does not match under certain conditions.
14. Fixed max number of eXP controllers to 16.
15. Fixed an error message when entering wrong address in device input window.
16. Fixed the problem that the order does not match when Group/Ungroup.
17. Modify movement speed when moving object using direction key of keyboard.
18. Fixed a problem where the builder terminated when changing the font in the individual Find/Replace menu.
19. Fixed a problem that forced project termination when using device map under certain conditions.
20. In Trend/Logging trend graph, the value is displayed when reference line value is 32 bit device.
21. When Copy/Paste the logging trend graph, paste problem is corrected.
22. Fixed a problem that when downloading a project to a storage device, the file is not released normally when saved as *.xpdz file.
23. Fixed so that the blinking timing becomes the same at the time of placement after setting image and string flash function of several Lamps/Switches.
24. Fixed the problem that when logging back up, strange lines are generated when using condition added at the end of CSV file.
25. PLC information display error when connecting with new PLC type.
26. XP-Remote communication failure error when using router.
27. Fixed Hangul Keypad Speed ??Problem.
28. Correction of language switching device output abnormality.
29. Correcting trend graph acquisition cycle abnormality.
30. Abnormal frame area behavior of view object.
31. Fixed security user ID mode error.
32. Correction of error related to N-phase lamp.
33. Corrected header fragmentation in logging view object.
34. Corrected the problem of filling operation with numeric input device 0.
35. Fixed the problem of downloading *.xpdz file.
36. Fixing user ID notation error.


ListList