LSIS

Print

Contact us

download of detail page
Category Smart Power Distribution > Low Voltage > Air Circuit Breakers Date
Product GM7 & GM7U
Question How can i copy program from G7M-M256 to another PLC?
Files
If you use G7M-M256 in GM7 PLC, you can copy the program to another PLC.
1. Write program to flash memory of G7M-M256.
2. Change another PLC to RUN mode.
3. Connect G7M-M256 device to another PLC(it should be run mode).
4. After turn off power, and turn on power.
5. Then the program from G7M-M256 is copied to another PLC.

PREV  >> Can I get XGB Auto-tuning Sample program?
NEXT  >> I have OS V1.1 of XBL-EMTA and want to upgrade to newest firmware. What should I do?
download of detail page
Category Smart Power Distribution > Low Voltage > Air Circuit Breakers
Date
Product GM7 & GM7U
Question How can i copy program from G7M-M256 to another PLC?
If you use G7M-M256 in GM7 PLC, you can copy the program to another PLC.
1. Write program to flash memory of G7M-M256.
2. Change another PLC to RUN mode.
3. Connect G7M-M256 device to another PLC(it should be run mode).
4. After turn off power, and turn on power.
5. Then the program from G7M-M256 is copied to another PLC.

ListList