||Smart Power Distribution > Low Voltage > EMPR
||1. Which measure is correct for resetting trip of EMPR: a) by once pressing button "Test/Reset"; b) resupply power of EMPR? But when we're try to reset trip by resupply power, the configuration of date is reset too. Instruction illustrate the electric scheme that show us the interrupting of supply power by "OFF/RESET" button. What the reason is of interrupting power supply of EMPR?
2. Where can we find the EXPAND description of parameters and trips of EMPR? The catalogs which could be download from LSIS.biz has not enough information about it.
When the EMPR reset you must pressing Reset button.
If you want to remot control reset, the power off is recommend.
When the power is supplied first or is resupplied after a power failure, you must set up the date.
||I want to communicate with Gipam 2200FN, Gimac II Plus by using Modbus RS485. I have a Modbus Master...
||What is the minimum capacity of the motor for some inverter?
For example, what is the applicable ...