LSIS

Print

Contact us

download of detail page
Category Smart Industrial Automation > Xmotion Servo System > Xmotion Servo System Date
Product
Question How could I change the contact A to B when CCW limit signal is turned on?
Files
Q.
How could I change the contact A to B when CCW limit signal is turned on?

A.
If CCW Limit signal is turned on, check specification and the wiring of the limit switch.
The default value is contact A when shipped from factory.
If you need to change the contact A to B, change the contact ‘High’ to ‘Low’ as below picture through the Drive CM.
PREV  >> PLC E-mail function
NEXT  >> How do I set the IP address of the Ethernet communication with the iS7?
download of detail page
Category Smart Industrial Automation > Xmotion Servo System > Xmotion Servo System
Date
Product
Question How could I change the contact A to B when CCW limit signal is turned on?
Q.
How could I change the contact A to B when CCW limit signal is turned on?

A.
If CCW Limit signal is turned on, check specification and the wiring of the limit switch.
The default value is contact A when shipped from factory.
If you need to change the contact A to B, change the contact ‘High’ to ‘Low’ as below picture through the Drive CM.
ListList