LSIS

Print

Contact us

download of detail page
Category Smart Industrial Automation > PLC > XGT Series (XGK, XGI, XGR) Date
Product XGI
Question Is there a function that change the Glofa project to XGI project with ease and speed . I’ve used Glofa series PLC’s. but I heard that Glofa series were discontinued. So I decide to replace the Glofa PLC’s with XGI PLC’s. Would you please let me know how I change the Glofa project to XGI project with ease and speed ?
Files
(1) Open GMWIN file in XG5000
Step1: Select [Project] - [Open GMWIN File] on the XG5000 menu.
Step2: Open the GMWIN project to convert to XG5000 project
(2) Convert GMWIN file to XG5000 file
Step1: Complete the New Project
Dialog Box and Click OK
Step2: Check the Result Window
(3) Check change of display type
: contact and coil may be converted to other types (refer to XG5000(IEC) Manual 3.3.1)
(4) Check changed function/function block
: There are functions of which type is changed (refer to XG5000(IEC) Manual 3.3.1)
(5) Check changed function/function block
: Function/function block of which I/O parameter is changed (refer to XG5000(IEC) Manual 3.3.1)
(6) Check Special & Communication Module Parameter Setting Instruction
: In the XGI Series, You can set Special & Communication Module Parameters by XG5000 window
not instructions. (Please refer to Product Manuals)

PREV  >> I want to communicate HMI and other vendor’s sensors by Modbus RTU protocol. HMI should set as Maste...
NEXT  >> What is sensorless vector control?
download of detail page
Category Smart Industrial Automation > PLC > XGT Series (XGK, XGI, XGR)
Date
Product XGI
Question Is there a function that change the Glofa project to XGI project with ease and speed . I’ve used Glofa series PLC’s. but I heard that Glofa series were discontinued. So I decide to replace the Glofa PLC’s with XGI PLC’s. Would you please let me know how I change the Glofa project to XGI project with ease and speed ?
(1) Open GMWIN file in XG5000
Step1: Select [Project] - [Open GMWIN File] on the XG5000 menu.
Step2: Open the GMWIN project to convert to XG5000 project
(2) Convert GMWIN file to XG5000 file
Step1: Complete the New Project
Dialog Box and Click OK
Step2: Check the Result Window
(3) Check change of display type
: contact and coil may be converted to other types (refer to XG5000(IEC) Manual 3.3.1)
(4) Check changed function/function block
: There are functions of which type is changed (refer to XG5000(IEC) Manual 3.3.1)
(5) Check changed function/function block
: Function/function block of which I/O parameter is changed (refer to XG5000(IEC) Manual 3.3.1)
(6) Check Special & Communication Module Parameter Setting Instruction
: In the XGI Series, You can set Special & Communication Module Parameters by XG5000 window
not instructions. (Please refer to Product Manuals)

ListList