LSIS

Print

Contact us

download of detail page
Category Smart Industrial Automation > Low Voltage VFD Date
Product
Question What is the 3-wire operation?
Files
The 3-wire operation latches the signal input (the signal stays on after the button is released), and is used when operating the inverter with a push button.
To enable the 3-wire operation, the following circuit sequence is necessary. The minimum input time (t) for 3-wire operation is 1ms, and the operation stops when both forward and reverse operation commands are entered at the same time.
PREV  >> I use analog output module to control a valve. I’d like to make analog output maintain the current o...
NEXT  >> Why does the inverter not operate when the frequency command is input?
download of detail page
Category Smart Industrial Automation > Low Voltage VFD
Date
Product
Question What is the 3-wire operation?
The 3-wire operation latches the signal input (the signal stays on after the button is released), and is used when operating the inverter with a push button.
To enable the 3-wire operation, the following circuit sequence is necessary. The minimum input time (t) for 3-wire operation is 1ms, and the operation stops when both forward and reverse operation commands are entered at the same time.
ListList